Magicard Enduro / Pronto / 300 / 600 — PVC card printing setup

Printer setup › Magicard Enduro / Pronto / 300 / 600

Printers: Magicard Enduro, Enduro+, Enduro3E, Pronto, 300, 600

1. Install the printer driver

Download the driver for your exact model and Windows version from the maker’s website: Magicard support ↗. After installing, print a Windows test page once to make sure the printer works.

2. Windows Printing preferences

1. Switch the printer on. Open Windows → Printers & scanners (Devices and Printers) → right-click your printer → Printing preferences.
2. The values below are a starting point for a double-side printer with a half-panel colour ribbon (colour on the photo side, black on the back). With a full-panel ribbon choose that ribbon and colour on both sides.
3. Set these options in Magicard — Printer:

   Card orientation

   Landscape

   Card size

   CR80 card

   Duplex printing

   as your printer allows

4. Set these options in Magicard — Card front:

   Color format

   Color / resin black (YMCK)

   Print overcoat

   ticked

   Black options → Black text uses K-Resin

   ticked

   Black options → Mono bitmaps use K-Resin

   ticked

   Black options → Black polygons use K-Resin

   ticked

5. Set these options in Magicard — Card back:

   Color format

   Monochrome (K only)

   For a double-side printer with a half-panel ribbon.

6. Set these options in Magicard — Image:

   Color correction

   Color management (built-in to driver)

   Resin quality

   High quality

   Printhead power → Options

   colour 60 · black resin 70 · overcoat 50 if the print is light

7. Click Apply / OK so Windows remembers the settings. Repeat them if Windows creates a second copy of the printer on another USB port.

3. Settings in Print Perfect Ai

1. Set these options in Print Perfect Ai → App Settings → Printer & output:

   Select Printer Type

   Single Side or Double Side

   Select Printer Brand

   Magicard

   Select Printer Name

   your card printer

   Half Panel Ribbon

   tick for half-panel ribbon / pre-printed cards

2. Double Side sends front and back as one job — no card flipping. Back side upside down? Tick “Rotate back side 180°”.
3. The card always fills the whole card page of the driver, so there is no white edge.
4. In the software click Print test card. If the print sits a little off the card, correct it with X Offset / Y Offset (mm) and print again — the values are saved.